Description
Collet ready spindle. This rare example of a Used Hardinge RS 65 MSY CNC Turning Centre with sub spindle, live tooling on both spindles + Y axis has just arrived. Well equipped with an extensive list of machine accessories.
MACHINE SPECIFICATION | |
Swing over way cover | 519mm |
Spindle centre height from floor | 1041mm |
Max turning diameter | 321mm |
Max turning length with collet | 609mm |
X axis travel | 189mm |
Z axis travel | 638mm |
Y axis travel | +50.8mm to -34.0mm |
X axis rapid traverse | 26m/min |
Z axis rapid traverse | 38m/min |
Y axis rapid traverse | 9.5m/min |
Main Spindle Specification | |
Spindle speed | 45-4500rpm |
Spindle nose | A2-6 |
Spindle motor | 26kW |
Hole through spindle | 74mm |
Drawtube (bar) capacity | 65mm |
Driven Tool Specification | |
Rotating tools | 12 |
Speed | 80-8000 rev/min |
Power | 3.7 kW |
Rotating tool torque | 32.6Nm |
Cutting diameter shank | 16mm |
Sub Spindle Specification | |
Spindle nose | A2-5 |
Chuck size | 165mm |
Spindle bore | 42mm |
Spindle motor | 7.5kW |
Speed | 60-6000rpm |
Power | 7.5kW |
Spindle torque | 47.7Nm |
Maximum travel | 603mm |
Rapid traverse speed | 38 m/min |
SPECIFICATION | |
General | |
Coolant tank capacity | 189 litres |
Length (including chip conveyor & barfeed) | 6400mm |
Depth | 2290mm |
Height | 1980mm |
Approximate weight | 7200Kg |
MACHINE EQUIPPED WITH |
Fanuc 18iTB CNC Control |
EMT super 80 magazine barfeed |
Swarf conveyor |
Parts catcher |
Parts conveyor |
Toolsetting probe |
8 off angle head driven toolholders |
3 off double ended driven toolholders |
4 off radial driven toolholders |
13 off static toolholders |
15 off assorted collets |
3 jaw chuck for subspindle |
Coolant system |
Lighting |
Enclosed Guarding |